Новости о продукции

Тонер-картридж в узле лазерного принтера играет важную роль в формировании изображения и напрямую влияет на насыщенность черного цвета при печати. Несколько ключевых компонентов лазерного барабана: тонер, светочувствительный барабан, зарядный валик, магнитный валик и скребок. Их соответствующие функции следующие: 1. Тонер, как расходный материал, непосредственно […]

1. To reduce the color deviation on neutral colors (grayscale) The imaging method used in the printer is CMYK color system (C-cyan; M-magenta; Y-yellow; K-key). CMYK color system belongs to subtractive color system, that is, the more different colors are superimposed, the darker the color. Eventually CMY will be synthesized into black. But with current […]

Our ink could be pigment ink and dye ink. We hav different volume 70ml and 100ml. 70ml box size is 46.5*37.5*25 100ml box size is 53*31.6*23.5

The laser printer has been warmed up for more than 2 minutes or the shape is not firm, and the text is off: 1.To consider whether the indoor temperature is above 20℃; 2.To check whether the thermistor has poor contact or failure; 3.To see if the voltage reaches 220V; 4.To see if the paper and […]

As we all know, printers and copiers use heating to fuse the toner on the paper to achieve fixing. Therefore, many printers and copiers indicate the operating temperature range (usually 10-23 ℃) in the manual. What will happen next? For example, in the winter in our central and northern regions, the general temperature is below […]

1. The printer casing must have a good grounding wire. Otherwise, the static electricity generated by the printer will make the performance of the machine unstable, affect the quality of samples, and damage the machine and hurt people in serious cases. 2. The printer has high pressure and high temperature, so you cannot open the […]

1. Different printing paper will affect the printing effect Normal printing paper is used, and the background color of the paper is dark; the quality of the paper is too poor, and the ink penetrates into the fibers of the paper or melts away, changing the color depth of the pattern. It is recommended to […]

1. The printing paper is wet If the printing paper is damp, consider replacing it with dry paper and printing again. 2. Dirty or aging transfer roller If it is checked that the transfer roller is dirty, the transfer roller needs to be cleaned; if it is aging, the transfer roller needs to be replaced. […]

1. The cleaning blade is notched or the photosensitive drum has obvious scratches If the cleaning blade is notched or the photosensitive drum has obvious scratches, it means that these two parts have been damaged. At this time, the cleaning blade or the photosensitive drum needs to be replaced to solve the problem. 2. The […]

1. The toner cartridge is not in place After the toner is filled, the pins on both sides of the toner cartridge are not installed properly during the process of installing the toner cartridge, which will cause the toner cartridge to not be fully installed in place. We took out the toner cartridge from the […]

1. The photosensitive drum layer or drum gear is defective If the photosensitive drum layer or drum gear of the toner cartridge is defective, the toner cartridge is basically scrapped and can no longer be used. At this time, only a new toner cartridge can be replaced. 2. The magnetic roller cover, magnetic roller coating, […]