Новости индустрии

Warping is a common problem in 3D printing, especially when using thermoplastic materials. It occurs when the edges of a printed part curl upward or the bottom gradually lifts away from the build plate. This can affect the appearance of the part and lead to dimensional inaccuracies, failed prints, and material waste. 1. Why Does […]

It is a common issue in office printing environments for a printer to continue displaying messages like "Replace toner," "Low toner," or "Toner cartridge not recognized" even after a new cartridge has been installed. Such issues do not necessarily indicate a quality defect in the toner cartridge itself; they can often be resolved by checking […]

Yes, it is possible. Even if printers belong to the same brand and series, models sold in different countries or regions may use different toner cartridge models. Why does this happen? There are several main reasons: Regional model variations: Different markets may use different part numbers for consumables. Chip compatibility: The chips or recognition mechanisms […]

5% page coverage means toner covers 5% of a page — roughly what a standard text-only letter uses. It matters because cartridge page yields are measured at this rate, under lab conditions (ISO/IEC 19752), not with your real documents. So the real question is your own coverage: Real pages ≈ Rated yield × (5% ÷ […]

When printouts appear faded or text looks washed out, many users immediately assume the toner cartridge is at fault. In reality, however, a decline in print quality can stem from various factors and is not necessarily caused by the cartridge itself. 1. Low Toner Levels As a toner cartridge nears the end of its lifespan […]

While both black and color toners are used in laser printing, they differ in their coloring materials, formulation design, and performance control due to varying imaging requirements. 1. Different Coloring Materials: Black toner typically uses carbon black as the primary coloring material, while color toners require pigments of different colors such as cyan, magenta, and […]

When choosing compatible toner cartridges, there's no absolute advantage or disadvantage between high-capacity and standard-capacity; the key factors are usage frequency, printing needs, and overall cost. 1. Standard-Capacity Toner Cartridges: Suitable for Daily Office Use Standard-capacity toner cartridges are typically cheaper and suitable for individual users with low printing volumes, small offices, or occasional printing […]

For enterprises, A4 paper is a high-frequency office consumable. When making a purchase, companies should not focus solely on price, but also consider paper quality, overall usage costs, and supply stability. Choosing the right A4 paper can improve office efficiency and reduce printing issues. 1. Paper Quality and Printing PerformanceHigh-quality A4 paper should have good […]

Waste toner is an unavoidable part of laser printing, but excessive waste toner not only affects print quality but can also increase consumable consumption and equipment maintenance costs. Optimizing usage and selecting appropriate consumables can effectively reduce waste toner generation. 1. Choose a Matching Toner Formula Toner particle size, flowability, and melting properties all affect […]

A toner cartridge's print quality isn't determined by a single component, but rather by the coordinated efforts of multiple components, including the photosensitive drum, toner, magnetic roller, wiper blade, charging roller, chip, and casing. Insufficient compatibility in any of these components can negatively impact the final print performance. 1. Photosensitive Drum and Toner Compatibility Affect […]

As a precision printing consumable, the storage environment of ink directly affects color performance, flowability, and printing stability. Inappropriate temperatures can degrade ink performance, impacting the final print quality. 1. High temperatures easily affect ink stability. Excessively high temperatures can accelerate changes in ink composition, affecting the dispersion of dyes or pigments, leading to color […]

Условия хранения нити для 3D-печати напрямую влияют на стабильность процесса печати и качество модели. Даже высококачественный филамент может давать такие проблемы, как нитеобразование, пузыри и обрывы, если он хранится ненадлежащим образом. 1. Оцените внешний вид филамента: правильно хранящийся филамент обычно имеет гладкую поверхность, однородный цвет и не имеет явных изменений цвета, трещин, […]