製品ニュース

1. Use copy paper correctly Laser printers are used to output paper patterns, so first select the paper. It is best to choose electrostatic copy paper. The range of paper is 60-105g / m2. Generally, 70g / m2 copy paper is often used. Paper that is too thin or too thick can easily cause paper jams. It may be possible to use paper that is too thick Will cause mechanical wear. It is better not to cut the paper by yourself, because the cut paper often has burrs. The accumulation of paper hair in the machine will cause damage to the machine parts and may also scratch the photosensitive drum. […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem with the waste powder scraper (such as scratches, aging, etc.) Solution: Replace the corresponding accessories. 5.There is a problem with the silo scraper Solution: Replace the corresponding accessories. 6.Drum core is injured Solution: Replace the corresponding accessories.

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; paper that is too thick and stiff (especially business card paper) will grind quickly Injury to the photosensitive drum should be used as little as possible; when printing film, the coating of some films will melt and adhere to the fixing roller, causing permanent damage, so special attention should be paid to the selection of […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend that you place the toner container on a piece of paper that is easy to handle and has a clean, smooth surface to prevent spilling of toner. 4. To prevent damage to the printer from static electricity, do not touch the electrodes shown in the figure. 5.Gently slide the green slider left and right several […]

Laser printing equipment, because of its stable output and large printing volume, has been accepted by various types of enterprises. For such a core component of printing equipment that has fully entered our office life, you may never have noticed that it is a photosensitive drum! When the user is judged by the performance parameters such as the printing speed and printing accuracy on the laser printing device, or is disturbed by dazzling functions such as ID card copying and cloud printing, you may ignore the most important photosensitive drum on the laser printing device. unit. The photosensitive drum unit on the laser printing equipment is the core of the […]

Why is the printer ink head blocked? 1. The ink head of an inkjet printer is very precise, only a few tenths of a person's hair is small, so if the volume of impurities in the printer ink is larger than the size of the ink head, it is obvious that these inks will block in the printer during operation. Ink head, which is an important cause of ink head clogging in inkjet printers. 2. For inkjet printers that have not been used for a long time, the ink near the ink head will harden due to weathering, which is also the cause of the ink head clogging of the […]

F-Fe3O4 crystal powder (PLGMENT): 20-30% Polyacrylate-styrene copolymer: 50-60% CCA: 10-20% Fluidizing agent SiO2, etc. Surface modifier polyethylene / polypropylene paraffin Toner is divided into magnetic toner and non-magnetic toner, and the distribution ratio of the toner used by each machine model is different. Many bottled toners or bulk toners are not distinguished. Only one type of magnetic toner is used. When using the wrong toner or poor toner, it is not only harmful to the human body and the environment, but also damages and affects the printer life.

Difference: 1. The toner cartridge is used for laser printers, and toner is used for printing; the ink cartridges are used for inkjet printers, and inks are used to adapt to different product ranges. 2. The toner cartridge is filled with powder, and the ink cartridge is filled with ink. The ink cartridge can be used for continuous supply, but the toner cartridge cannot. 3, imaging principle, laser printers rely on laser imaging; inkjet printers rely on ink imaging. 4. A box of dozens of toner can print thousands of copies. A box of about 150 ink can only print a few hundred copies. 5. The ink cartridge has a […]

To meet different needs, toner production is developing in the direction of refinement, colorization and high speed. Toner manufacturing mainly uses crushing and polymerization methods: Polymerization method The polymerization method is a fine chemical carbon powder technology, which includes (suspension polymerization, emulsion polymerization, microcapsule filling, dispersion polymerization, compression polymerization, chemical pulverization). The polymerization method is completed in the liquid phase, which can produce carbon powder with a lower melting temperature, which can meet the requirements of modern technology for energy saving and environmental protection. By adjusting the amount of dispersant, the stirring speed, the polymerization time and the concentration of the solution, the particle size of the carbon powder particles […]

The laser printer's toner cartridge is an organic silicon photoconductor, which has the problem of working fatigue. Therefore, the continuous working time should not be too long. If the output is large, you can stop after a while and continue to output. Some users use two toner cartridges to work alternately. This is also a way. As for the maintenance of the toner cartridge, it can generally be performed as follows: 1. Carefully remove the toner cartridge assembly and wipe the surface clean with absorbent cotton, but do not apply force to prevent the surface of the toner cartridge from being damaged. 2. Wipe the surface of the toner cartridge […]

1. Avoid using or storing in high temperature, high humidity, and cold environment, and avoid prolonged exposure to strong light; 2. When the toner cartridge is not in use, do not tear the black packaging bag, and do not open the photoconductor cover on the toner cartridge. 3. Do not touch the drum core or rotate the drum core by hand. Pay attention to the direction when the drum core rotates. If the rotation direction is wrong, it will damage the parts and cause powder leakage or smearing during printing. 4. Before the toner cartridge is put on the machine, the handle should be shaken horizontally 4-5 times to make […]

1. Toner cartridge leakage: In addition to damage to the casing, it is usually caused by the accumulation of powder in the magnetic drum inside the toner cartridge during transportation or during use by some customers. The solution is simple, just turn the drum core a few turns in the forward direction. 2. The print file and the drum core have a longitudinal underpass of the same width of more than 1 cm at the same time: the general customer also believes that the powder is leaking. In fact, this is a problem with the scraper, which causes the powder on the stick core to be dirty. 3, the printed […]