ニュース

1. The printed document and the drum core appear at the same time in the longitudinal width of more than 1 cm at the same time: This is a problem with the scraper, causing the powder on the stick core to be dirty. 2. Long black stripes appear on the printed document: usually the scraper and the small scraper on the side of the scraper are stuck with dirt or paper scraps. 3. A horizontal underworld appears in the print file: usually the magnetic sticks in the toner cartridge have accumulated powder, and it can be rotated a few times. 4. If there is obvious background gray on the printed […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem with the waste powder scraper (such as scratches, aging, etc.) Solution: Replace the corresponding accessories. 5.There is a problem with the silo scraper Solution: Replace the corresponding accessories. 6.Drum core is injured Solution: Replace the corresponding accessories.

April 2nd World Autism Awareness Day ,there are 1 in 160 children is suffering from autism , and they are right next to you. We should give more concern and care to them.

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; paper that is too thick and stiff (especially business card paper) will grind quickly Injury to the photosensitive drum should be used as little as possible; when printing film, the coating of some films will melt and adhere to the fixing roller, causing permanent damage, so special attention should be paid to the selection of […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend that you place the toner container on a piece of paper that is easy to handle and has a clean, smooth surface to prevent spilling of toner. 4. To prevent damage to the printer from static electricity, do not touch the electrodes shown in the figure. 5.Gently slide the green slider left and right several […]

Laser printing equipment, because of its stable output and large printing volume, has been accepted by various types of enterprises. For such a core component of printing equipment that has fully entered our office life, you may never have noticed that it is a photosensitive drum! When the user is judged by the performance parameters such as the printing speed and printing accuracy on the laser printing device, or is disturbed by dazzling functions such as ID card copying and cloud printing, you may ignore the most important photosensitive drum on the laser printing device. unit. The photosensitive drum unit on the laser printing equipment is the core of the […]

In the process of using the printer, it is often encountered that the ink cartridge is not recognized. Sometimes, as long as you reinstall the ink cartridge or restart the printer, the ink cartridge recognition will return to normal, but often these small tips and small methods can't solve the above problems. First, check if the ink cartridge and printer are compatible. How to determine what kind of ink cartridge is correct? Generally speaking, when we open the ink cartridge compartment cover of the printer, the type of the ink cartridge will be affixed inside, and during the driver installation process, the driver after installation will also prompt the ink […]

Why is the printer ink head blocked? 1. The ink head of an inkjet printer is very precise, only a few tenths of a person's hair is small, so if the volume of impurities in the printer ink is larger than the size of the ink head, it is obvious that these inks will block in the printer during operation. Ink head, which is an important cause of ink head clogging in inkjet printers. 2. For inkjet printers that have not been used for a long time, the ink near the ink head will harden due to weathering, which is also the cause of the ink head clogging of the […]

F-Fe3O4 crystal powder (PLGMENT): 20-30% Polyacrylate-styrene copolymer: 50-60% CCA: 10-20% Fluidizing agent SiO2, etc. Surface modifier polyethylene / polypropylene paraffin Toner is divided into magnetic toner and non-magnetic toner, and the distribution ratio of the toner used by each machine model is different. Many bottled toners or bulk toners are not distinguished. Only one type of magnetic toner is used. When using the wrong toner or poor toner, it is not only harmful to the human body and the environment, but also damages and affects the printer life.

To protect trees is to contribute to the green environment of the world. Saving paper,starting from double-sided printing.

Difference: 1. The toner cartridge is used for laser printers, and toner is used for printing; the ink cartridges are used for inkjet printers, and inks are used to adapt to different product ranges. 2. The toner cartridge is filled with powder, and the ink cartridge is filled with ink. The ink cartridge can be used for continuous supply, but the toner cartridge cannot. 3, imaging principle, laser printers rely on laser imaging; inkjet printers rely on ink imaging. 4. A box of dozens of toner can print thousands of copies. A box of about 150 ink can only print a few hundred copies. 5. The ink cartridge has a […]

To meet different needs, toner production is developing in the direction of refinement, colorization and high speed. Toner manufacturing mainly uses crushing and polymerization methods: Polymerization method The polymerization method is a fine chemical carbon powder technology, which includes (suspension polymerization, emulsion polymerization, microcapsule filling, dispersion polymerization, compression polymerization, chemical pulverization). The polymerization method is completed in the liquid phase, which can produce carbon powder with a lower melting temperature, which can meet the requirements of modern technology for energy saving and environmental protection. By adjusting the amount of dispersant, the stirring speed, the polymerization time and the concentration of the solution, the particle size of the carbon powder particles […]