月: 2020年11月

Printers are still indispensable   With the development of The Times, it can be said that paperless office has been favored by more and more users, but it cannot be said that paperless office can replace paper-based office. As far as paper is concerned, it is still an indispensable part of people's work, so it is reasonable to think that printing products are still indispensable in our life and work. Since the emergence of the original factory even for printing products on the market in 2011, in the past seven years, both ink warehouse type and ink-type printing products have been deeply loved by users. Its biggest characteristic is the […]

IDC has released the global Print device Tracking Report for the third quarter of 2020. In the quarter, global shipments of printing equipment rose 8.6 per cent year on year to nearly 26.2m units. This is the first reported increase in global print device shipments since the second quarter of 2018. IDC says this is driven by demand for low-end, affordable inkjet equipment for telecommuting and home education. Unit shipments in the world's three largest regional markets -- the US, Western Europe and China -- grew year-on-year in the third quarter. HP's and Canon's global shipments rose 22.7 percent and 12.1 percent, respectively, from a year earlier. In addition, shipments […]

  Thank our customers for their support, thank colleagues and family for their care, thank the company for giving us a platform! Thanks to Asta for letting us meet and know each other and let us rely on each other, and hope that our story will last forever. Although Thanksgiving is a Western holiday, the meaning of the holiday is to give us a platform for our busy and difficult to export gratitude, so this is still a beautiful holiday. Learning to be grateful is an important lesson in our life. Perhaps we hardly talk about love, and often ignore the feelings of the closest people around us, thinking that […]

The paper appears completely white when printing 1. There is a problem with the scanner, mirror and transfer assembly Check the scanner, reflector and transfer components, and repair or replace them in time. 2. The protective cover is not opened, and the conductive steel sheet of the magnetic roller is not in contact with the conductive metal wire of the machine At this time, you need to take out the powder box and reinstall the machine. Make sure that the protective cover is completely hit and the conductive steel sheet of the magnetic roller is in good contact with the conductive metal wire of the machine. 3. The photosensitive drum […]

1. The corona wire is broken If the corona wire is broken, replace the corona wire. 2. Missing charging roller or poor assembly If the printing is completely black, it may be due to missing charging roller or improper assembly. This is usually caused by poor installation of the toner cartridge after manual removal. At this time, it is necessary to check whether there is a problem with the charging roller, and reassemble the charging roller. 3. Poor contact of the conductive support of the charging roller or the conductive steel sheet If the conductive support of the charging roller or the conductive steel sheet is in poor contact, reassemble […]

1. Check if the printing paper is wet Sometimes, if the printing paper is damp, the printing will not feed! At this time, dry paper needs to be replaced to print normally. 2. Check the printing paper loading position Check whether the loading position of the printing paper is correct and whether it exceeds the arrow mark on the left guide rail. After adjustment, try again. 3. Check if there is any printing paper jammed in the printer If the printing paper is jammed in the printer and not taken out in time, the printing will not feed. If a paper jam occurs when the printer is printing, carefully remove […]

With the decline in the price of various laser printers, the price of original consumables-toner cartridges has also risen all the way, maintaining a "higher above" attitude. Many manufacturers have also set up various obstacles to prevent users from adding powder by themselves. Operation, as a result, the cost of laser printing becomes very high, and the used toner cartridge will also cause great pollution to the environment. So what should I do to add powder to the printer, if we hire a professional team from the outside to do the powder addition operation, what is the relevant price? I will give you a detailed introduction today: How to add […]

Common printing problems of inkjet printers 1 Incomplete and unclear printing -cause of issue: Insufficient supply margin Clogged nozzle -solution: 1. Check whether the supply of consumables is sufficient, if the supply is insufficient, you need to replace the printing consumables; 2. If there is sufficient consumables, the ink cartridges should be cleaned, considering that the nozzles are clogged. 2 Black lines with uneven thickness appear -cause of issue: Dirty print head The distance between the print head and the print roller is too small Printing paper is too thick -solution: Remove the print head for cleaning, or adjust the distance between the print head and the printing roller. 3 […]

An epidemic at the beginning of this year directly promoted the development of "online business" of thousands of companies. In the past, when we did offline, we might be pulling the printer to the graphic store, and explaining the advantages and selling points of the machine face to face with the graphic store users. Although this gives the user a more intuitive experience, the disadvantages are also obvious: 1. It requires a lot of manpower, material resources and financial resources, and the cost is high; 2. The user coverage is narrow; 3. Long project cycle. These shortcomings can be remedied online. If graphics and text are also to be used […]

Why is the opc stained with toner and how to deal with it 1. There are sticky substances on the drum core, such as grease, etc. Solution: wipe the drum core with a clean soft cloth. 2. The powder is not filled well Solution: Fill the powder carefully, don't add too much at one time. 3. Toner quality is not good Solution: select good quality toner.

1. First turn off the printer power switch, and unplug the printer from the power outlet. 2. Then open the flip cover of the laser printer, carefully remove the photosensitive drum assembly, wipe the surface with absorbent cotton, but do not use force to prevent scratches on the photosensitive drum surface. 3. Next, wipe the surface of the photosensitive drum with absorbent cotton dipped in a special cleaner for the photosensitive drum. When wiping, a spiral drawing method should be adopted, and immediately after polishing, use absorbent cotton to wipe the cleaner off. 4. After wiping, use a gauze containing talcum powder to gently pat a layer of talcum powder […]