月: 2019年7月

Packing List Printer 1PC Power Adapter 1PC USB Cable 1PC Power Cable 1PC User's Manual(Including Warranty card, Certification) 1PC Main Features Support thermal paper roll / Adhesive paper Simultaneously meets different needs in the range of media width 25~60mm, easy to operate Automatic paper calibrate function Label and bill printing 2 in 1 With U disk function, USB drive with driver and installation instructions Support mobile device connection printing Custom interface (optional with Bluetooth 4.0, WIFI interface) Overheat protection Disclaimer: This product is a Class A product. This product is only suitable for safe use in non-tropical areas. In the living environment, this product may cause radio interference. In this case, users may need to take effective measures. Attentions: The printer should be installed […]

Inkjet printers are much more expensive than laser printers. In addition to the maintenance of the machine during the maintenance process, the use environment must also be clean, mainly to ensure that the inkjet printer is in use, the nozzle does not cause plugging due to dust in the air. 1. Do not expose the ink cartridge to the air for a long time. In the use of inkjet printers, do not expose the ink cartridge to the air for a long time. Because of the physical properties of the ink, it is easy to cause the ink to dry out under long-term exposure. Once the ink in the ink […]

There are two reasons for the absence of copy images, one is that the connection of the charging or transfer electrode to the high voltage transformer is damaged, and the other is that the high voltage transformer itself is damaged. When checking, open the back cover of the machine and remove the electrode socket. After pressing the copy start button, the metal part of the electrode socket is touched with the metal frame of the machine. If the discharge lamp is found to be a fire, it proves that the electrode is good. If there is no discharge and ignition, the output of the high voltage transformer is defective and […]

There are two reasons for the absence of copy images, one is that the connection of the charging or transfer electrode to the high voltage transformer is damaged, and the other is that the high voltage transformer itself is damaged. When checking, open the back cover of the machine and remove the electrode socket. After pressing the copy start button, the metal part of the electrode socket is touched with the metal frame of the machine. If the discharge lamp is found to be a fire, it proves that the electrode is good. If there is no discharge and ignition, the output of the high voltage transformer is defective and […]

First, the printer prints out fuzzy or missing words 1. Check the power supply to ensure that it is the power supply specified by the manufacturer. 2. Check if the paper size meets the printing requirements. 3. Check if there is any foreign matter such as dust on the thermal head and remove it. 4. If there is a missing word or punctuation in the printed ticket sample, you can directly check whether the thermal head is dusty. If it still cannot be eliminated after cleaning, you may need to replace the thermal head or motherboard to directly contact the relevant sales Department of after-sales.

First, install software, drivers 1. Insert the CD into the CD-ROM drive. If it does not start automatically, open the file on the CD-ROM and double-click "Setup.exe". Installation tips Step by step to install the P-touch software. 2. Follow the prompts to select the labeler driver model. When prompted, connect your label printer to the computer using the USB cable and turn on the labeler. Once the labeler is detected, the driver will be installed automatically. Second, connect to the computer Connect the label printer to your computer using the interface cable. Third, install the ribbon 1. Select the type of ribbon according to the type of label machine used. […]

After the printer cartridge is dry, if it is used again, you need to clean the printer cartridge first to prevent the print head from being blocked. The following is the printer cartridge cleaning method: 1. Carefully remove the ink cartridges from the printer. 2. After removing the ink cartridge, find the nozzle of the ink cartridge (the part of the cartridge is similar to the integrated circuit). 3. Prepare a bowl of warm water (50 ~ 60 degrees Celsius), soak the nozzle at the bottom of the cartridge into the water for 5 minutes, taking care not to put the entire cartridge into the water. 4. Take out the […]

The first thing to look at is what model your pin printer is, and then determine how long it can take, because the different models of the machine ribbon are different, and the color is long and short. If the general print volume is not very large, you can count the last 1M1 days. This is almost the same, in fact, the ribbon can not be calculated by time. It is calculated according to your usage. As long as the ribbon is used, the printed word is a little light, or the ribbon is hairy or broken, then the ribbon can not be used. The ribbon is a cloth with […]

1. Problem: bottom ash Reasons: low humidity, high temperature; PCR (charge roller) defects; magnetic roller sheath and coating defects; PCR or corona electrical contact defects; OPC (photosensitive drum) defects; poor carbon powder, carbon powder mixed; Solution: Best RH=50-60%; replace defective parts; replace toner; check high voltage power supply. 2, the problem: ghost Reasons: cleaning blade, a photosensitive drum, charging roller, corona wire, eraser lamp, developing roller defect; upper fixing roller, high voltage power supply defect; bad toner. Solution: Replace or clean defective parts; check high voltage power supply; replace toner. 3, the problem: hollow words Cause: Upper fixing roller is worn; toner problem; improper media; the paper surface is too […]

Model:                    285X For Use In:            HP LaserJet P1100/P1102/P1102W/M1130/1210MFP/M1212NF/M1217nfw/M1132 Yield:                      2,500 pages @ 5% coverage Warranty:             18 months & 1:1 Replace Defective goods within 2% defective rate Quality Control:   ISO9001, ISO14001, Rhos, Reach, STMC, CE ACO Compatible CE285X Hp LaserJet Toner Cartridges Are very popular among the market. CE285X toner cartridges quality is the same as original but cheaper price. If you need bulk orders, welcome to inquiry. Email: marketing@astaoffice.com Website: www.acoatoner.com Tel:+86 755 89734724 Skype/WeChat: Astaoffice WhatsApp: +86 137 9825 8787

1. The printing environment should be good. And The machine couldn't be put in a place where the sun is shining or the sun is shining. 2. The printer's print head and roller should be cleaned regularly, and the dust in the machine should be cleaned frequently. After cleaning the printer, it is best to let the machine rest for half an hour before working. 3. When cleaning the print head, be sure to disconnect the power of the printer first, and then clean the printer with alcohol and cotton. When cleaning the print head, do not wear hard objects like rings on your hands to avoid scratching the print […]

Toner cartridge First, tell if the printer is a laser printer or an inkjet printer. First, inkjet printer Shallow color reasons: 1. The amount of toner is insufficient, 2. Cartridge toner is damp and agglomerated 3. The cartridge is dry 4. The print nozzle is blocked Solution: Replenish the cartridge toner / clean the print nozzle 1. The remaining powder of the powder feeding bin and the powder bin should be cleaned up. 2. After the toner is applied, shake the toner in the powder feeding bin in parallel, and turn the gear several times clockwise to make the toner evenly adhere to the magnetic roller to ensure the toner […]