ニュース

Many printer toner cartridges do not actually use up the toner in the laser printer selenium when they are replaced. Some toner is often left in the waste toner box or toner box. If it is not cleaned, we will add toner. With the original toner, it may form a blocky solid due to incompatibility. Therefore, we must clean the original toner cartridge before adding the toner. When cleaning, first pour out the toner in the waste toner box and the toner cartridge, and then use a brush to gently remove the toner remaining on the edge of the toner cartridge. We can use a leather tiger or a hair […]

ACO tells you that it can be divided into two parts: adding new toner and replacing the photosensitive drum. The following takes the commonly used HP 6L printer toner cartridge as an example to provide you with a method of how to regenerate the toner cartridge. First of all, cut off the power of the printer, take the toner cartridge out of the printer (this is of course, or how to regenerate it), then use diagonal pliers to clamp the metal pin on one side and pull it out carefully (or Use a nail to put the metal pin into the toner cartridge. After opening the toner cartridge, the metal […]

1. Installation and use environment: temperature 10-330C, relative humidity 20-80%. 2. Use suitable printing media: do not use paper with uneven cuts, tears, wrinkles, curled edges, torn holes, and staples; too thick and too hard paper (especially business card paper) will quickly scratch the photosensitive Use drums as little as possible; when printing films, some of the film coatings will melt and stick to the fixing roller, causing permanent damage, so pay special attention to the choice of film. 3. When replacing the toner cartridge, it is best to use a vacuum cleaner to clean the place where the toner cartridge is placed in the machine. Use a soft cloth […]