News

1. Low cost The gas packaging bag is composed of 99% air and 1% plastic film. The packaging material is completely flat before use, which does not occupy space and can save a lot of transportation and storage costs. Under general conditions of use, gas packaging bags can save you 20% to 40% of the […]

The toner chip is a control component on the toner cartridge. Its role is very simple, receive information, store information, feedback information, and control the printer based on this information. 1. Received information, mainly including the print volume of the toner cartridge, the amount of toner and toner coverage. This information is collected by the […]

Paper jams are a common problem with printers. Incorrect removal methods may cause greater damage to the machine. After a paper jam has occurred, turn off the power first, and then open the front door to identify the location of the paper jam. If the paper is stuck in front of the fixing unit, it […]

After the toner in the toner cartridge is used up, the toner shortage indicator of the printer is on, and the toner cartridge should be refilled. After adding powder, use a soft cloth or a brush to clean around the powder box. At the same time, the power cord of the printer should be unplugged, […]

1. Use copy paper correctly Laser printers are used to output paper patterns, so first select the paper. It is best to choose electrostatic copy paper. The range of paper is 60-105g / m2. Generally, 70g / m2 copy paper is often used. Paper that is too thin or too thick can easily cause paper […]

1. The printed document and the drum core appear at the same time in the longitudinal width of more than 1 cm at the same time: This is a problem with the scraper, causing the powder on the stick core to be dirty. 2. Long black stripes appear on the printed document: usually the scraper […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem […]

April 2nd World Autism Awareness Day ,there are 1 in 160 children is suffering from autism , and they are right next to you. We should give more concern and care to them.

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend […]