Produktnyheder

1. The cleaning blade is notched or the photosensitive drum has obvious scratches If the cleaning blade is notched or the photosensitive drum has obvious scratches, it means that these two parts have been damaged. At this time, the cleaning blade or the photosensitive drum needs to be replaced to solve the problem. 2. The […]

1. The toner cartridge is not in place After the toner is filled, the pins on both sides of the toner cartridge are not installed properly during the process of installing the toner cartridge, which will cause the toner cartridge to not be fully installed in place. We took out the toner cartridge from the […]

1. Det lysfølsomme tromlelag eller tromlegearet er defekt Hvis det lysfølsomme tromlelag eller tromlegearet i tonerkassetten er defekt, er tonerkassetten stort set skrottet og kan ikke længere bruges. På dette tidspunkt kan kun en ny tonerpatron udskiftes. 2. Det magnetiske rulledæksel, den magnetiske rullebelægning, [...]

Printers now play a very important role in our lives. We may encounter this kind of trouble when using printers. When printing a file, the printer shows that it is ready, but the file cannot be printed. How can we solve this problem? The specific method is as follows: 1. The printer cannot print, first […]

Printers are still indispensable   With the development of The Times, it can be said that paperless office has been favored by more and more users, but it cannot be said that paperless office can replace paper-based office. As far as paper is concerned, it is still an indispensable part of people's work, so it […]

With the decline in the price of various laser printers, the price of original consumables-toner cartridges has also risen all the way, maintaining a "higher above" attitude. Many manufacturers have also set up various obstacles to prevent users from adding powder by themselves. Operation, as a result, the cost of laser printing becomes very high, […]

Common printing problems of inkjet printers 1 Incomplete and unclear printing -cause of issue: Insufficient supply margin Clogged nozzle -solution: 1. Check whether the supply of consumables is sufficient, if the supply is insufficient, you need to replace the printing consumables; 2. If there is sufficient consumables, the ink cartridges should be cleaned, considering that […]

Why is the opc stained with toner and how to deal with it 1. There are sticky substances on the drum core, such as grease, etc. Solution: wipe the drum core with a clean soft cloth. 2. The powder is not filled well Solution: Fill the powder carefully, don't add too much at one time. […]

1. First turn off the printer power switch, and unplug the printer from the power outlet. 2. Then open the flip cover of the laser printer, carefully remove the photosensitive drum assembly, wipe the surface with absorbent cotton, but do not use force to prevent scratches on the photosensitive drum surface. 3. Next, wipe the […]

1. Prøv at bruge miljøvenlige tonerkassetter fra almindelige virksomheder eller mærker. 2. Hvis du ikke er sikker på, at den fyldte toner er ugiftig, skal du holde printeren væk fra menneskekroppen og placere den på et ventileret sted, f.eks. ved brug af en kopimaskine. 3. Prøv ikke at fylde toner i [...]

1. Kontrollér, om udskriftspapiret er vådt Hvis udskriftspapiret er fugtigt, vil udskriften nogle gange ikke blive fremført! På dette tidspunkt skal tørt papir udskiftes for at kunne printe normalt. 2. Kontrollér papirets ilægningsposition Kontrollér, om papirets ilægningsposition er korrekt, og om den overskrider [...].